01 Printed material
Material & finish
Painted/coated appearance only, not printed metal. Finishing requires a separate specification and quote. Opaque coatings block the backlight.
Colour, sheen and backlighting studies for large-format printing.
Backlight previews an LED strip at floor level facing upward behind the surround. Light transmission and hotspot control require a physical material sample.
02 Countertop
Material appearance is an approximation. Reference samples remain the colour standard. GLB includes colours, transparency and layer-height metadata, not the live layer shader.
01 Manufacturing envelope
Large format1,500 × 1,500 × 1,500Per printed section · mm
Checking segmented panels…
Checking surface angles…
Large counters are divided into printable sections. The wall-angle control limits vertical overhangs in the surround geometry.
02 Slide-down fixing
Integrated Z interface
The surround slides vertically onto Z extrusions fixed to the outside of the joinery.
Fixing rails are schematic. Profile dimensions, mating recesses, tolerances and final panel joints are not manufacturing-ready. Allow vertical installation access.
03 Review before manufacture
Surface overhangs and panel bounds are constrained in the model. Fixing strength, seams, tolerances, access and print settings still require Special Studio review.
